Siemens SIMOCODE pro User Manual

Description of the blocks
4.3 MMOprtn block
SIMOCODE pro PCS 7 Library V9.0
152 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
4.3.23.3
MMOprtn - Diagnostics
MMOprtn - Diagnostics
In the SIMOCODE pro PCS 7 Library V9.0, all available diagnostics messages are displayed
in the diagnostics view.
Based on the parameters, there are diagnostics views for the status, events, warnings, and
trips.
Note
During rack fault no messages will be displayed.
①
Export button
This button exports avaialble diagnostic messages in a .csv file format to the project folder.
Note:
The button is disabled for operation at web navigator view.
②
Read Data
Button for updating the data (RdDataOp).
Figure 4-1 Event diagnostics

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000