Siemens SIMOCODE pro User Manual

Templates
2.6 Template MCCB
SIMOCODE pro PCS 7 Library V9.0
Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
45
2.6
Template MCCB
This template supports the control function
Circuit breaker
.
It contains one instance each of the following blocks:
•
MMOprtn
•
MMMeas
•
MMStat
•
MMLog
•
MotL
•
FbSwtMMS
•
Event16Ts
Interconnections
1. Instantiate the template from the SIMOCODE pro Library.
2. Assign the input address of the SIMOCODE pro device to the textual interconnection
"Input WORD address of SIMOCODE pro Module (IW x)" for linking the parameters
PZDIn01 (SIMOCODE blocks) / PZDIn1 (FbSwtMMS) with the logical address of the
starter. Input address and Output address should be maintained same while configuring.
Reference
Description of Blocks (Page 72)
Parameter (Page 234)

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000