Siemens SIMOCODE pro User Manual

Description of the blocks
4.3 MMOprtn block
SIMOCODE pro PCS 7 Library V9.0
140 Programming and Operating Manual, 06/2017, A5E40899442002A/RS-AA/001
Table 4- 51 DiagTrp2 – trip diagnostics for SIMOCODE pro devices
Bit
Meaning
0
Level P >
1 Level P <
2
Level Cos-Phi <
3 Level U <
4
AM1 Level 0/4-20mA >
5
AM1 Level 0/4-20mA <
6
Stalled rotor
7
Number of Starts >
8
External fault 1
9
External fault 2
10
External fault 3
11
External fault 4
12
External fault 5
13
External fault 6
14
AM1 open circuit
15
Test shutdown
16
DM-F safety-oriented tripping
17
DM-F wiring
18
DM-FL cross circuit
Table 4- 52 DiagTrp2 – trip diagnostics for PROFINET pro devices
Bit
Meaning
19
TM2 level T >
20
TM2 sensor fault
21
TM2 out of range
22 AM2 level 0/4-20mA >
23
AM2 level 0/4-20mA <
24 AM2 open circuit
25
EM open circuit
26
EM short circuit
4.3.22
Assignment of the diagnostics information
Based on the parameters, there are diagnostics views for the status, events, warnings, and
trips.
The motor starter diagnostics is transferred to the faceplates via the
Diag_Sts, Diag_Evt,
Diag_Wrn, and Diag_Trp output parameters.

Siemens SIMOCODE pro Specifications

General

Protection Class	IP20
Mounting Type	DIN rail mounting
Rated Operational Voltage	24 V DC
Rated Current	Up to 820 A
Protection Functions	Overload, short-circuit, phase failure, asymmetry, ground fault, motor stall
Operating Temperature Range	-25°C to +60°C
Communication Protocols	PROFIBUS DP, PROFINET, Modbus RTU
Analog Outputs	Up to 2
Temperature Monitoring	PTC/KTY, RTD (PT100/PT1000)
Digital Outputs	Relay outputs, Solid-state outputs
Analog Inputs	0/4-20mA, PT100/PT1000