2. External structure &pin definition
Ethernet interface: Standard RJ45 socket, automatically adapt 10M/1000M Ethernet .Use the
standard network cable, not crossover cable whether you connect the switch,router or directly
connect the PC.
The network status LED indicator on the RJ45 socket
LINK LED（left light,green） ACT LED（right light,yellow）
Status Description Status Description
Light on Network cable is connected
correctly, work properly.
Flash Sending and receiving data through
the
RJ45 port
Flash Network cable is not plugged in, no
available network
Extinguish No data transceiving
- 6 -
To Next Page
Loading...
