Siemens S75 - Security

Calling24
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\S75_Minos_1\out-
left page (24) of S75 MINOS, w/o ptt, 143mm, FUG, en, A31008-H2500-A1-1-7619 (13.09.2005, 13:24)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Calling
Dialling with number
keys
The phone must be switched on
(standby mode).
J
Enter number (always
with area/international
dialling code).
]A short press clears the
last digit, a long press
clears the entire number.
A
Press the Call key. The dis-
played phone number is
dialled.
Ending a call
B
Press briefly. Press this key
even if the person on the
other end of the line has
hung up first.
Setting the volume
[ / \
Adjust the volume with
the plus/minus keys (only
possible during a call).
If a Car Kit is used, its volume setting
will not affect the usual setting on
the phone.
Redialling
To redial the phone number last
called:
A
Press Call key the twice.
To redial other phone numbers that
were dialled previously:
A
Press the Call key once.
I
Pick out the phone
number from the list,
then press …
A
… to dial.
International dialling codes
0
Press and hold until a "+" is
displayed.
§Options§ Open call menu.
Country Press and select country.
Phone number memo
You can enter a phone number during the
call. The person to whom you are speaking
can hear these entries. When the connec-
tion has ended you can save or dial the
phone number.