Setup84
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\S75_Minos_1\out-
left page (84) of S75 MINOS, w/o ptt, 143mm, FUG, en, A31008-H2500-A1-1-7619 (13.09.2005, 13:24)
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Setup
Security
C
¢T¢Security
¢Select function.
Auto key lock
The keypad is locked automatically if
no key has been pressed for a specif-
ic (pre-determinable) time. This pre-
vents the phone from being used ac-
cidentally. However, you can still be
called and you can still make an
emergency call.
H
Select Set.
J
Enter time in minutes and
seconds after which the
keypad lock is to be
activated.
Direct call
(Phone-code protected)
Only one phone number can be
dialled (page 28).
Only ¡ b
(PIN2 or phone-code protected)
Dialling options are restricted to SIM-
protected phone numbers in the
Phonebook. If only area codes are
entered, relevant phone numbers
can be added to these manually be-
fore dialling.
If the SIM card does not support PIN2
input, the whole Phonebook can be
protected with the phone code.
This SIM only b
(PIN2 or phone-code protected)
The phone can be connected to a
SIM card once the phone code is en-
tered. Unless the phone code is
known the phone will not operate
with a different SIM card.
If the phone is to be used with a dif-
ferent SIM card, enter the phone
code when requested.
Certificates
Display certificates for secure data
connections.
Codes
For description, see page 13:
PIN control, Change PIN, Change PIN2,
Chg. phonecode
Additional information
The keypad can also be locked and un-
locked directly in standby mode.
In each case:
#
Press and hold.
To Next Page
Loading...
