Siemens S75 - Connectivity

71Setup
right page (71) of S75 MINOS, w/o ptt, 143mm, FUG, en, A31008-H2500-A1-1-7619 (13.09.2005, 13:24)
© Siemens AG 2003, C:\Daten_itl\Siemens\DTP-Satz\Produkte\S75_Minos_1\out-
Template: X75, Version 2.2;VAR Language: en; VAR issue date: 050822
Setup
Connectivity
C
¢T¢Connectivity
¢Select function.
IrDA
Your phone has an infrared inter-
face. With this interface, you can ex-
change data such as pictures, ring-
tones, Addressbook entries,
business cards or organiser data with
other devices which also have
an infrared interface.
The infrared interface is on the left
side of the phone. The distance be-
tween the two devices must not ex-
ceed 30 cm. The infrared windows in
both appliances must be aligned as
accurately as possible with each
other.
ì
Activate/deactivate IrDA.
If IrDA (infrared) is activated, Blue-
tooth is not active and vice versa.
Shown in the display:
¯ IrDA activated.
®
During transmission.
EGPRS (EDGE)
ì
Activate/deactivate
EGPRS.
EGPRS is a method for transmitting
data in the mobile network faster
than with GPRS. Use EGPRS and if the
network has sufficient capacity, you
can be connected to the Internet
permanently. Only the actual trans-
mission time is charged by the net-
work operator. Some service provid-
ers do not yet support this service.
Shown in the display:
£
Activated and available.
¢
Registered.
¤
Temporarily interrupted.
EGPRS info
Display information on connection
status.