To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE S612 and is the answer not in the manual?
General| Brand | Siemens |
|---|---|
| Model | SCALANCE S612 |
| Category | Protection Device |
| Language | English |
Provides general safety warnings, including battery handling and compliance with directives.
Safety instructions for operating the device in hazardous environments like Class I, Division 2, or Zone 2.
Specific safety advice for using the device under ATEX and IECEx hazardous area conditions.
Safety precautions for utilizing the device in UL-HazLoc classified hazardous locations.
Safety information pertaining to use in areas governed by NEC or CEC regulations.
Detailed technical data including connections, electrical specifications, and cable lengths.
Outlines essential hardware features such as rugged housing, mounting options, and power supply.
Explains the safety extra-low voltage (SELV) requirements and connection details for the power supply.
Explains how to connect the SCALANCE S device to Ethernet networks, detailing port types.
Details the function of the reset button for device restart and factory settings reset.
Describes the C-PLUG for configuration storage, its application, removal, and replacement.
Step-by-step instructions for installing the device on a 35 mm DIN rail.
Instructions for mounting the SCALANCE S on a SIMATIC S7-300 standard rail.
Step-by-step guide for physically connecting the SCALANCE S device and its network interfaces.
Guide to configuring the device using the Security Configuration Tool and downloading settings.
