Siemens SCALANCE X-300 Series - Page 287

Configuration using Web Based Management and Command Line Interface
4.7 The Router menu (SCALANCE X414-3E)
SCALANCE X-300 / X-400
Configuration Manual, 10/2014, C79000-G8976-C187-22
287
Syntax of the Command Line Interface
Table 4- 91 Current Routes - CLI\ROUTER\ROUTES>
Command
Description
Comment
info
Displays the current routes.
Administrator only.
add <IP> <subnet> <nextIP>
[E|D] [name]
Adds a new route.
E|D parameter for ena
bling/disabling "Use
Hardware".
Administrator only.
edit <IP> [nextIP] [E|D] [name] Modifies a route.
E|D parameter for ena
bling/disabling "Use
Hardware".
Administrator only.
delete <IP>
Deletes a route.
Administrator only.
The "info" CLI command displays a table (analogous to the table in the Web Interface). The
"Metric" and "Status" columns are, however, restricted to two characters here (Me; St).
The following statuses are possible:
● OS (OSPF)
● RI (RIP)
● st (static)
● lo (local)
● ot (other)
● ?? (invalid)
The following are possible in the "Hardware" column (HW) (see also Web Interface):
● Yes: X (upper case X)
● In use: * (asterisk)
● No: - (minus sign)