To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE X-100 and is the answer not in the manual?
General| Operating Temperature | -40 to +70 °C |
|---|---|
| Protection Class | IP30 |
| Product Type | Ethernet Switch |
| Port Type | 10/100 Mbps RJ45 |
| Data Transfer Rate | 10/100 Mbit/s |
| Switching Capacity | 1.6 Gbps |
| Switch Properties | Store-and-forward |
| Power Supply | 24 V DC |
| Mounting | DIN rail mounting |
| Protocol Support | Ethernet, VLAN, STP, RSTP, MSTP |
| Certifications | CE, UL, cUL |
| Weight | Varies by model (e.g., SCALANCE X108: approx. 400 g) |
Details the intended audience, glossary, and security information for the operating instructions.
Covers product capabilities, components, accessories, unpacking, and ESD precautions.
Explains implementable network topologies with SCALANCE X-100 switches.
Provides a summary of product characteristics and connection options.
Details the connections and features of the SCALANCE X104-2.
Details the connections and features of the SCALANCE X106-1.
Details the connections and features of the SCALANCE X108.
Details the connections, PoE function, and features of SCALANCE X108PoE.
Details the connections and features of the SCALANCE X112-2.
Details the connections and features of the SCALANCE X116.
Details the connections and features of the SCALANCE X124.
Covers TP port features, pinouts, cable lengths, and autonegotiation.
Explains FO port transmission speed, medium, range, and connectors.
Describes the meaning and status of fault, power, and port LEDs.
Explains how to use the SET button to display and change the fault mask.
Covers general safety, hazardous area use, and ATEX/IECEx compliance.
Details installation methods like DIN rail, standard rail, and wall mounting.
Step-by-step guide for mounting the device on a 35 mm DIN rail.
Instructions for mounting the device on a SIMATIC S7-300 standard rail.
Procedures and notes for mounting the device on a wall.
Safety precautions for connecting the device, including hazardous areas.
Details the power supply connection, voltage range, and requirements.
Explains the signaling contact function and its connection.
Covers grounding procedures for different installation types.
Instructions for plugging in and pulling the IE FC RJ-45 Plug 180.
Discusses common issues like fuses, link display, voltage drops, and device defects.
Lists technical data, cable lengths, and parameters for SCALANCE X104-2.
Lists technical data, cable lengths, and parameters for SCALANCE X106-1.
Lists technical data, cable lengths, and parameters for SCALANCE X108.
Lists technical data, cable lengths, PoE properties, and parameters for X108PoE.
Lists technical data, cable lengths, and parameters for SCALANCE X112-2.
Lists technical data, cable lengths, and parameters for SCALANCE X116.
Lists technical data, cable lengths, and parameters for SCALANCE X124.
Details mechanical stability test results for various SCALANCE models.
Covers EC directives, ATEX, EMC, and RoHS compliance for the products.
Details ATEX directive, applied standards, and related EU directives.
Explains EMC directive and applied standards for the products.
Explains RoHS directive and applied standard for the products.
Lists product designations and applicable standards for EMC and RoHS.
Details ATEX classification and applied standards for potentially explosive atmospheres.
Information on IECEx, FM, and cULus classifications and standards.
Provides rear view dimension drawings for various SCALANCE X models.
Shows the side view dimension drawing of the SCALANCE devices.
Illustrates the bending radii for cables connected to the device.
