Siemens SCALANCE X-100 - Product Standards Summary; ATEX (KEMA 07 ATEX0145 X) Classification

Certifications and approvals
8.2 ATEX (KEMA 07 ATEX0145 X)
SCALANCE X-100
Operating Instructions, 12/2016, A2B00060666-08
65
8.1.4
Products
Product designation and standards
The standards that apply to the product are described in EMC (Page 64) and RoHS
(Page 64).
Product name
Standards
SCALANCE X104-2
1, 2, 4, 6, 7
SCALANCE X106-1 1, 2, 4, 6, 7
SCALANCE X108
1, 2, 4, 6, 7
SCALANCE X108PoE 1, 2, 4, 6, 7
SCALANCE X112-2
1, 2, 4, 6, 7
SCALANCE X116
1, 2, 4, 6, 7
SCALANCE X124
1, 2, 4, 6, 7
8.2
ATEX (KEMA 07 ATEX0145 X)
ATEX (explosion protection directive)
WARNING
When using SIMATIC NET products in hazardous area zone 2, make absolutely sure that
the associated conditions in the following document are adhered to:
"SIMATIC NET Product Information Use of subasseblies/modules in a Zone 2 Hazardous
Area".
You will find this document
• on the data medium that ships with some devices.
• on the Internet pages of Siemens Industry Online Support
(http://support.automation.siemens.com/WW/view/en
).
Enter the document identification number C234 as the search term.
The SIMATIC NET products meet the requirements of the EC directive 94/9/EC "Equipment
and Protective Devices for Use in Potentially Explosive Atmospheres”. and as of 20.04.2016
the EC directive 2014/34/EU.
ATEX classification:
II 3 G Ex nA IIC T4 Gc
KEMA 07ATEX0145 X