Siemens SCALANCE X-100 User Manual

SCALANCE X-100
Operating Instructions, 12/2016, A2B00060666-08
5
Introduction
1
1.1
On the Operating Instructions
Purpose of the Operating Instructions
These Operating Instructions support you when commissioning networks with the Industrial
Ethernet switches of the SCALANCE X-100 product line.
Validity of the Operating Instructions
These operating instructions are valid for the following devices:
Device
Order number
SCALANCE X104-2 6GK5 104-2BB00-2AA3
SCALANCE X106-1
6GK5 106-1BB00-2AA3
SCALANCE X108
6GK5 108-0BA00-2AA3
SCALANCE X108PoE
6GK5 108-0PA00-2AA3
SCALANCE X112-2
6GK5 112-2BB00-2AA3
SCALANCE X116
6GK5 116-0BA00-2AA3
SCALANCE X124
6GK5 124-0BA00-2AA3
Further documentation
The "SIMATIC NET Industrial Ethernet Twisted Pair and Fiber Optic Networks" manual
contains additional information on other SIMATIC NET products that you can operate along
with the IE switches of the SCALANCE XB-000 product line in an Industrial Ethernet
network.
You can order the manual "SIMATIC NET Industrial Twisted Pair and Fiber Optic Networks",
release 05/2001, using the following order numbers:
6GK1970-1BA10-0AA0 German
6GK1970-1BA10-0AA1 English
6GK1970-1BA10-0AA2 French
6GK1970-1BA10-0AA4 Italian
You will also find this network manual on the Internet pages of Service & Support under the
following entry ID: 1172207 (http://support.automation.siemens.com/WW/view/en/1172207
).
You will find further information in the "System Manual Industrial Ethernet" in the Manual
Collection.
You will find further information on the SCALANCE system on the Internet at
www.siemens.com/scalance (www.siemens.com/scalance
).
You can obtain the "PROFINET Installation Guide" from the PROFIBUS User Organization
(PNO).

Siemens SCALANCE X-100 Specifications

General

Brand	Siemens
Model	SCALANCE X-100
Category	Switch
Language	English