To Next PageTo Next Page
Need help?Do you have a question about the Siemens SCALANCE XR-500 and is the answer not in the manual?
General| Product function / VLAN | Yes |
|---|---|
| Port Types | Ethernet |
| Operating voltage / rated value | 24 V DC |
| Supply voltage / 1 | 24 V DC |
| Type of voltage / 1 / of the supply voltage | DC |
| Operating Temperature | -40 ... 70 °C |
| Mounting Type | Wall mounting, DIN rail mounting |
| Mounting | DIN rail, wall mounting |
| Protocol Support | SNMP |
| Redundancy | Yes |
| Certifications | UL, CE, FCC, ATEX, IECEx |
Details on industrial security functions and concepts.
Instructions for handling device faults or errors.
Instructions for handling electrostatic sensitive devices (ESD).
Specific safety guidelines for hazardous environments.
General advice and recommendations for securing the device and network.
Recommendations for secure user authentication and password management.
Guidelines for using and managing SSL/TLS certificates and keys.
Security measures for physical and remote access to the device.
Security recommendations related to device hardware and software.
Security configurations for network interfaces.
Guidance on using secure protocols and disabling non-secure ones.
Safety notices and precautions to observe during installation.
Notes and procedures for 19" rack mounting.
Safety and operational notes for 19" rack mounting.
Procedures for mounting and removing devices in a 19" rack.
Information and procedures for four-point mounting.
Notes regarding four-point mounting and required hardware.
Step-by-step procedure for four-point mounting.
Instructions for handling pluggable transceivers.
Step-by-step instructions for inserting SFP/SFP+ transceivers.
Step-by-step instructions for removing SFP/SFP+ transceivers.
Safety notices and precautions for connecting the device.
Guidelines and requirements for wiring cables and terminals.
Information and safety notices for the 24V AC/DC power supply.
Safety warnings and information for 100-240V AC/110-250V DC power supply.
Safety warnings and procedures for grounding the device.
Explains functional grounding and its requirements.
Details protective grounding for 24V AC/DC devices.
Details protective grounding for 100-240V AC/110-250V DC devices.
Step-by-step instructions for connecting grounding via a bolt.
Information on Industrial Ethernet connections.
How to reset the device to defaults during startup.
How to reset the device to defaults while it's running.
Procedure for loading firmware using TFTP.
Information on ATEX, IECEx, UKEX, and CCC Ex certifications.
Details on cULus approval for hazardous locations.
