Siemens SCALANCE XR-500 User Manual

Unpacking and checking
WARNING
Do not use any parts that show evidence of damage
If you use damaged parts, there is no guarantee that the device will function according to the
speci󹪝cation.
If you use damaged parts, this can lead to the following problems:
• Injury to persons
• Loss of the approvals
• Violation of the EMC regulations
• Damage to the device and other components
Use only undamaged parts.
1. Make sure that the package is complete.
2. Check all the parts for transport damage.
4.5 Spare parts
The following spare parts are available for the devices mentioned in the scope of validity:
Component Description Article number
Spring-loaded terminal
block, 2-pins
2-pin spring-loaded terminal block for connect‐
ing the 24VDC power supply and the 24VDC
signaling contact.
Pack of 5
6GK5980-0BB10-0AA5
4-pin spring-loaded ter‐
minal block
4-pin spring-loaded terminal block for connect‐
ing the 24VDC power supply
Pack of 5
6GK5980-1DB10-0AA5
4.6 Accessories
The following accessories are available for the devices mentioned in the scope of validity:
4.6.1 Installation
Component Description Article number
SCALANCEXR-300 Rack
Mount Kit
Mounting bracket for four-point mount‐
ing
Pack of 4
6GK5980-2BA00-0AA4
Description of the device
4.6Accessories
SCALANCE XR-500
36 Operating Instructions, 07/2023, C79000-G8976-C692-01

Siemens SCALANCE XR-500 Specifications

General

Brand	Siemens
Model	SCALANCE XR-500
Category	Switch
Language	English