EasyManua.ls Logo

Siemens SCALANCE XR528-6M

Siemens SCALANCE XR528-6M
112 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Loading...
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
___________________
SIMATIC NET
Industrial Ethernet switches
SCALANCE XR-500
Operating Instructions
05/2017
A5E03275845
-11
Introduction
1
Safety notes
2
Description of the device
3
Assembling
4
Connecting
5
Uninstalling
6
Upkeep and maintenance
7
Technical data
8
Dimension drawings
9
Certification
10

Table of Contents

Question and Answer IconNeed help?

Do you have a question about the Siemens SCALANCE XR528-6M and is the answer not in the manual?

Siemens SCALANCE XR528-6M Specifications

General IconGeneral
Product Type DesignationSCALANCE XR528-6M
Number of Ports in Total28
Number of Ports 10/100/1000 Mbit/s24
Number of Ports 1000/2500/5000/10000 Mbit/s4
Switching Capacity Non-BlockingYes
VLAN SupportYes
Operating Temperature-40 to +70 °C
Protection ClassIP30
WeightApprox. 3.5 kg
Product TypeManaged Switch
LayerL2/L3
Jumbo FramesYes
Power SupplyRedundant Power Supply
Supply Voltage24 V DC
Mounting TypeRack Mount

Summary

Safety notes

General notices

Covers critical safety warnings, including restricted use and ambient temperature limits.

Safety notices on use in hazardous areas

Provides specific safety instructions for operating the device in potentially explosive atmospheres.

Security recommendations

Details cybersecurity best practices for device access, passwords, and network security.

Description of the device

Permitted ambient temperature

Details operational temperature limits for various device models and configurations.

C-PLUG KEY-PLUG

Explains the function, operation, and error handling of configuration storage modules.

Assembling

Safety notices for installation

Covers critical safety guidelines and warnings before installing the device.

19 rack mounting

Provides detailed instructions and warnings for mounting the device in a 19-inch rack.

Four-point mounting

Explains the requirements and procedure for secure four-point mounting, especially for ships.

Connecting

Commissioning

Covers the initial setup steps and network integration requirements for devices.

24 VDC power supply

Explains how to connect the device to a 24 VDC power source, including safety notes.

100 to 240 VAC power supply

Details the connection of AC power supplies, safety warnings, and information on PS598-1 unit.

Upkeep and maintenance

Downloading new firmware using TFTP without WBM and CLI

Method for updating device firmware via TFTP when WBM or CLI are inaccessible.

Restoring the factory settings

Guides on how to reset the device to its original factory default configuration.

Technical data

Related product manuals