Siemens SCALANCE XR528-6M

Description of the device
3.1 Product overview
SCALANCE XR-500
Operating Instructions, 05/2017, A5E03275845-11
23
SFP+ data cable
The following cables are available for SFP+ transceivers:
Component
Description
Article number
IE CABLE SFP+/SFP+ Preassembled IE cable with SFP+
plugs,
electrical, 10 Gbps,
pack of 1
Length 1 m
6GK5 980-3CB00-0AA1
Length 2 m 6GK5 980-3CB00-0AA2
Length 7 m 6GK5 980-3CB00-0AA7
The following devices have SFP+ slots:
● SCALANCE XR526-8C
Note
1)
Restriction with SFP+ transceivers for SCALANCE XR526-8C
If you use SFP+ transceivers identifie
d with
1)
with the SCALANCE XR526-8C, the
maximum ambient temperature is reduced to 50 ℃.
Note
2)
Restriction for DFP+ transceivers for SCALANCE XR526-8C (2 x 24 VDC)
If you use SFP+ transceivers identified with
2)
with the SCALANCE XR526-8C (2 x 24
VD
C), the maximum ambient temperature is reduced to 60 ℃.
For further information on the ambient temperature, refer to sections “Permitted ambient
temperature (Page 19)“ and “Technical specifications of the SCALANCE XR526-8C
(Page 86)“.
● SCALANCE XR528-6M
● SCALANCE XR552-12M
3.1.2.2
Additional accessories for modular devices
The following additional accessories are available for devices SCALANCE XR528-6M and
SCALANCE XR552-12M:
Fan unit
Type
Properties
Article number
FAN597-1
For SCALANCE XR552-12M
6GK5 597-1AA00-8AA0
FAN597-2
For SCALANCE XR528-6M
6GK5 597-2AA00-8AA0
NOTICE
Operation only with fan unit
Use the devices SCALANCE XR528-6M and SCALANCE XR552-12M only with a correctly
fitted fan unit. Operation without the fan is not possible and would damage the device.