cli(config)#
Syntax
Call up the command with the following parameters:
signaling-contact status {open|close}
The parameters have the following meaning:
Parameter Description
open Signaling contact is opened.
close Signaling contact is closed.
Result
The signaling contact is opened or closed.
Further notes
You display the setting with the show signaling contact command.
Functions specific to SCALANCE
4.4 Signaling contact
SCALANCE XB-200/XC-200/XF-200BA/XP-200/XR-300WG Command Line Interface
Configuration Manual, 07/2017, C79000-G8976-C361-06 141
To Next Page
Loading...
