Accessories
4.5 Manual operators
3VA molded case circuit breakers with IEC certificate
318 Manual, 03/2019, A5E03603177010-03
1. Press the door interlocking pin with a sharp object.
2. Hold the pin down while the door is opened.
(https://support.industry.siemens.com/cs/ww/en/view/80600132)
Door mounted rotary operators are supplied as standard with a tolerance compensator. This
device compensates any potential minor offset between the rotary switch of the cubicle
doors and the shaft of the door mounted rotary operator.
Tolerance compensator
To Next Page
Loading...
