Accessories
4.9 Communication and system integration
3VA molded case circuit breakers with IEC certificate
490 Manual, 03/2019, A5E03603177010-03
Commissioning and testing of electronic trip units using powerconfig
powerconfig
powerconfig performs the following functions for 3VA molded case circuit breakers:
● Parameterization of 3VA ETUs and other 3VA components
● Testing of 3VA
● Commissioning of 3VA
● Statistical analysis of 3VA
● Readout of measured variables such as energy, current, voltage and power from 3VA
molded case circuit breakers
● Readout of minimum and maximum values from 3VA molded case circuit breakers
● Diagnostics of 3VA
The PC on which powerconfig is installed is connected to the 3VA molded case circuit
breaker by means of the COM800 / COM100 breaker data server (optionally with modules)
or the TD500 test device.
The TD500 test device is required in order to perform function tests. You can find more
detailed information on the TD500 test device in chapter TD500 test device (Page 513).
To Next Page
Loading...
