Accessories
4.6 Motor operators
3VA molded case circuit breakers with IEC certificate
344 Manual, 03/2019, A5E03603177010-03
Resetting the molded case circuit breaker
If the 3VA molded case circuit breaker has tripped, the LED labeled "TRIP" lights up
Reset mode setting
The method by which the 3VA molded case circuit breaker is reset by the motor operator
depends on the selected reset mode.
The reset mode can be set. After the molded case circuit breaker has tripped, the selected
reset mode determines the response of the motor operator in the TRIP position.
Motor operator response to tripping of the 3VA molded case circuit breaker depending on the
reset mode selection:
To Next Page
Loading...
