Accessories
4.8 Residual current devices
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03
429
Description of front panel view
Display elements
"Ready" signal, alarms and monitoring
● "Ready" signal of the residual current device:
The LED labeled "ACT" stands for ACTIVE and lights up when the residual current device
is ready to operate.
● Pre-alarm:
The Basic RCD520B features an alarm LED labeled "AL" which lights up promptly to
indicate potential shutdown of the installation due to residual current.
To Next Page
Loading...
