Accessories
4.10 EFB300 external function box
3VA molded case circuit breakers with IEC certificate
Manual, 03/2019, A5E03603177010-03
505
4. In order to deactivate the output again, press the <SET> button again for longer than
2 seconds.
The LED of the activated output will change from steady illumination to flashing. The
output is deactivated, but still selected.
5. In order to select the next output, press the <SET> button briefly ①.
The LED of the next output starts to flash
②, the output is selected.
6. Repeat steps 3 to 5 in order to check the wiring of all digital outputs in succession.
To Next Page
Loading...
