Operation and Display
4.3 Key Definition
SICAM P35 P36, 3-phase Multi-Function Power Meter, User Manual
E50417-H8940-C562-4, Release Date 06.2018
21
Code list of optional settings in area B:
Note
In flip-with-key state or parameter-set-with-key state, this product will automatically return to cyclic display state
if no key operation within defined duration.
4.3 Key Definition
Key Functions at Flip-With-Key Display Mode
Active power 12 13 14
Reactive power 15 16 17
Apparent power 18 19 20
Power factor 21 / /
Phase angle 22 / /
Data item Data type (current value) Data item Data
Tran-
sient
Maximun Minimum Current
month
Phase
L1
Phase
L2
Phase
L3
Average phase
voltage
228 229 230 Import active
power
251 252 253 254
Average line
voltage
231 232 233 Export active
power
255 256 257 258
Average current 234 235 236 Total active
power
259 260 261 262
Neutral current 237 238 239 Net active
power
263 264 265 266
Total active power 240 241 242 Impot reactive
power
267 268 269 270
Total re active
power
243 244 245 Export reactive
power
271 272 273 274
Total ap pa re nt
power
246 247 248 Total reactive
power
275 276 277 278
Total power factor 249 / / Net reactive
power
279 280 281 282
Frequency 250 /
Error code 283 /
Data item Data type (current value)
Transient Maximun Minimum
Key symbol ▲▼
Function
1) Switch from cyclic display state
to key display state through press-
ing "▲" or "▼".
2) Flip over to previous screen with
"▲" and to next screen with "▼".
Enter next menu
1) Switch between A (multi-
line) and B (single line) display
areas
2) Return to previous menu
To Next Page
Loading...
