Configuring
Application Module FM 458-1 DP - User Manual 4-101
A5E01078222-02 Edition 03.2009
2. User selects SRT400: If d998 = 134, then the identification routine is
considered to have been successful. This means that the user can
only address the technology, also independently of the basic device!
The following is still valid: Parameter d999 is optional to identify the
software version and release of standard software packages.
d999 Software Examples
1AB Angular synchronism, version A.Bx
(x is used to number compatible versions)
120
SPA440 V2.0x
123
SPA440 V2.3x
2AB Axial winder, version A.Bx
221
SPW420 V2.1x
3AB Cross-cutter/closed-loop shears control,
version A.Bx
310
SPS450 V1.0x
If the device identification is not successful, then an attempt is made to
identify the known devices types.
If “DRIVE Monitor“ recognizes a different software (d999), the “Create
database” option is listed in the “Device identification” dialog box. This
means that a specific database can be set-up.
To Next Page
Loading...
