Siemens SIMATIC HMI KP300 Basic mono PN - Scope

Preface
Basic Panels
4 Operating Instructions, 04/2012, A5E02421799-03
Scope
These operating instructions are valid for all SIMATIC HMI Basic Panels. The following
naming conventions apply:
Device designation
SIMATIC HMI
Device type Interface type Can be configured with
KP300 Basic mono PN WinCC (TIA Portal) as of V11
KP400 Basic color PN
Keyboard unit
WinCC (TIA Portal) as of V11 SP2
Update 2 with HSP Basic 4" color
KTP400 Basic mono PN WinCC flexible and WinCC (TIA
Portal) as of V11
KTP400 Basic color PN WinCC (TIA Portal) as of V11 SP2
Update 2 with HSP Basic 4" color
KTP600 Basic mono PN
Basic Panel PN
KTP600 Basic color DP Basic Panel DP
KTP600 Basic color PN Basic Panel PN
KTP1000 Basic color DP Basic Panel DP
KTP1000 Basic color PN
Touch device
with function
keys
TP1500 Basic color PN Touch device
Basic Panel PN
WinCC flexible and WinCC (TIA
Portal) as of V11
In addition, the following collective designations are also used in these operating
instructions:
Designation Covers the HMI devices
KTP400 Basic KTP400 Basic mono PN, KTP400 Basic color PN
KTP600 Basic KTP600 Basic mono PN, KTP600 Basic color DP, KTP600 Basic color PN
KTP1000 KTP1000 Basic color DP, KTP1000 Basic color PN
Basic knowledge required
Knowledge of automation technology and process communication is necessary to
understand the operating instructions.
An understanding of the use of computers and operating systems is also required.