Siemens SIMATIC IOT2000 Series

Installing and connecting the device
3.2 Installing the IOT2000 Extension Modules
IOT2000 Extension Modules
Operating Instructions, 2018/05, A5E39456816-AB
15
3.1.2
Identification data of the device
The device can be clearly identified with the help of this identification data in case of repairs
or theft.
Enter the identification data in the following table:
Order number
6ES ...
Serial number
S V-
Production version
FS
You can find the order number, serial number and production version (FS) from the rating
plate. Below is just an example.
3.1.3
Recycling and disposal
Marking according to WEEE guideline. Do not discard the device with your household waste.
Observe the local legal guidelines for disposal. Alternatively, you can use a certified disposal
service company.
3.2
Installing the IOT2000 Extension Modules
Note
If the equipment is used in manner not specified by the manufacture, the protection provided
by the equipment may be impaired.
Requirements
● IOT2000 is disconnected from the power supply.