What to do if my Siemens SIMATIC IPC647E Industrial PC is not operational?
If your Siemens Industrial PC is not operational, first check the power supply, power cable, and power plug. Ensure the on/off switch is in the correct position. Also, verify the ambient conditions are within the specified range. If the device was transported in cold weather, allow it to sit for approximately 12 hours before turning it on.
What to do if the monitor remains dark on my Siemens Industrial PC?
If the monitor remains dark on your Siemens Industrial PC, first, ensure the monitor is switched on and not in power save mode (press any key). Then, check the brightness setting using the brightness button. Also, verify that the power cord is properly connected to both the monitor and the power outlet, and that the monitor cable is securely connected to both the system unit and the monitor.
How to correct the time and/or date on a Siemens SIMATIC IPC647E?
To correct the time and/or date on your Siemens Industrial PC, open the firmware configuration menu by pressing the key during the boot operation. Then, set the correct date and time in the "Main" tab.
What to do if the Siemens SIMATIC IPC647E Industrial PC monitor remains dark?
If the Siemens Industrial PC monitor remains dark, first ensure the monitor is switched on and not in power save mode (press any key). Then, increase the brightness using the brightness button. Check that the power cord and monitor cable are properly connected to both the monitor, the system unit, and a grounded power outlet. Also, ensure multi-monitoring is correctly activated and configured in the BIOS.
Why is my Siemens SIMATIC IPC647E device not operational?
General| Type | Industrial PC |
|---|---|
| Processor | Intel Core i7 |
| Operating System | Windows 10 IoT Enterprise |
| Power Supply | 24V DC |
| RAM | Up to 32 GB DDR4 |
| Display | No display |
| Ports | USB 3.0, USB 2.0, Ethernet, DisplayPort |
| Expansion Slots | 2 x PCIe |
| Weight | 4.5 kg |
| Operating Temperature | 0 °C to 50 °C |
| Certifications | CE |
| Interfaces | Ethernet, USB, Serial |
| Connectivity | Ethernet |
To Next Page
