What to do if Windows no longer boots on Siemens SIMATIC IPC627E Industrial PC?
If Windows no longer boots on your Siemens Industrial PC, check the settings in the BIOS Setup "SATA Configuration" submenu and the settings in the firmware (BIOS) boot menu.
What to do if the Siemens SIMATIC IPC627E Industrial PC device is not operational?
If your Siemens Industrial PC is not operational, first, check the power supply, power cord, and power plug to ensure they are properly connected. Also, verify that the on-off switch is in the correct position. If the issue persists, check the ambient conditions to ensure the device is operating within specified limits. If the device was transported in cold weather, wait approximately 12 hours before switching it on.
Why does the external monitor remain dark on my Siemens Industrial PC?
If the external monitor remains dark, make sure the monitor is switched on. Check if the monitor is in 'power save' mode; if so, press any key on the keyboard. Also, verify that the brightness hasn't been set too low; increase the screen brightness. Finally, ensure that the power cord and monitor cable are properly connected to both the monitor and the system unit or grounded outlet.
What to do if the mouse pointer does not appear on the screen of my Siemens SIMATIC IPC627E?
If the mouse pointer does not appear on the screen of your Siemens Industrial PC, check whether the mouse driver is properly installed and available when you start the user program. Also, check whether the mouse cord is properly connected to the system unit. If you are using an adapter or expansion for the mouse cable, check those connectors as well.
Lists essential documentation and resources for operating the device.
Details key features and benefits of the SIMATIC IPC627E.
Describes the intended use cases and industries for the SIMATIC IPC627E.
Details the physical layout and components of the device's front panel.
Covers general safety precautions, risk of electric shock, lightning strikes, and ESD.
Information on operating the device within specified environmental limits and conditions.
Guidelines and procedures for physically installing the device.
Instructions for connecting power, networks, and peripherals to the device.
How to monitor device functions using SIMATIC DiagBase/DiagMonitor software.
Information on using Intel AMT for remote management and troubleshooting.
Information on compatible expansion cards and their installation.
Details on installing and removing RAM modules and compatibility.
Procedures for changing internal and removable drives, including SSDs and HDDs.
Detailed instructions for removing and installing various hardware components.
Guides for installing the OS, software, and device drivers.
Overview of the device's general technical properties, dimensions, and certifications.
Details on power consumption, voltage requirements, and supply specifications.
Specifications for the device's motherboard, including chipset, processor, and slots.
Describes the various external interfaces like USB, Ethernet, DVI, DisplayPort.
Lists online resources, contact information, and required details for technical support.
Common problems, their causes, and remedies for the SIMATIC IPC627E.
General| Power Supply | 24 V DC |
|---|---|
| Protection Class | IP20 |
| Display | No display |
| RAM Type | DDR4 |
| Storage | HDD or SSD |
| Operating System | Windows 10 IoT Enterprise |
| Ethernet | 2 x 1 Gbps |
| USB Ports | 4 x USB 3.0 |
| Serial Ports | 2 x COM |
| Expansion Slots | 1 x PCIe x16, 1 x PCIe x4 |
| Operating Temperature | 0°C to 50°C |
To Next Page
