Installing and connecting the device
3.2 Installing the device
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
39
3.2 Installing the device
3.2.1 Installation guidelines
Procedure during installation and mounting
Dangerous voltage and fire hazard
Improper actions during installation and assembly may lead to personal injury and/or
substantial damage to equipment.
You should observe the installation and assembly notes under:
• Notes on mounting (Page 30)
• Notes on ambient and environmental conditions (Page 30)
Securing the device
Insufficient load carrying capacity
If the wall it is mounted on does not have a sufficient load-bearing capacity, the device may
fall and be damaged.
• Ensure that the mounting surface on the wall can bear four times the total weight of the
device, including fixing elements.
Incorrect fixing elements
The device may not be securely fitted if you use screws other than those specified below
for mounting. The device can fall and may be damaged.
• Use only the specified screws.
To Next Page
Loading...
Need help?
General
