Installing and connecting the device
3.3 Connecting the device
SIMATIC IPC627E
Operating Instructions, 12/2018, A5E44297201-AA
53
3.3.5 Connecting the device to networks
The following options are available for the integration in existing or planned system
environments or networks:
Ethernet
You can use the integrated Ethernet interfaces (10/100/1000 Mbps) for communication and
data exchange with automation devices, e.g. SIMATIC S7.
You need the "SOFTNET S7" software package for this.
PROFINET
PROFINET can be operated via:
● Standard Ethernet interfaces (RT)
Additional information
You can find additional information on the Internet at: Technical Support
(https://support.industry.siemens.com/cs/ww/en/).
To Next Page
Loading...
Need help?
General
