To Next PageTo Next PageWhat to do if my Siemens Desktop monitor remains dark?
If your Siemens Desktop monitor remains dark, first ensure the monitor is switched on and not in power save mode by pressing any key. Then, increase the brightness using the brightness button. Check that the power cord and monitor cable are properly connected to both the monitor, the system unit, and the grounded shockproof outlet.
Why is my Siemens Desktop not operational?
If your Siemens Desktop is not operational, check the power supply, power cord, and power plug to ensure they are properly connected and functioning. Also, verify that the On/Off switch is in the correct position. Finally, check the ambient conditions to ensure the device is being operated within the specified range; if it was transported in cold weather, wait about 12 hours before turning it on.
What to do if the mouse pointer does not appear on the Siemens Desktop screen?
If the mouse pointer does not appear on the screen of your Siemens Desktop, verify that the mouse cord is properly connected to the system unit. If you are using an adapter or extension for the mouse cable, inspect these connectors as well. Also, ensure that the mouse driver is properly installed and available when you start the user program; refer to the documentation for detailed information about the mouse driver.
Why are the time and data still wrong on my Siemens Desktop?
If the time and date are still wrong on your Siemens Desktop, even after setting it in the BIOS, the backup battery is likely dead. Replace the backup battery to resolve this issue.
General| Storage | mSATA SSD up to 128 GB |
|---|---|
| Operating System | Windows 10 IoT Enterprise, Windows 7 Professional |
| Ethernet | 2 x Gigabit Ethernet |
| Serial Ports | 1 x RS232/RS485 |
| Interfaces | Audio Line in/out |
| Expansion Slots | 1 x CFast slot |
| Power Supply | 24 V DC |
| Mounting | DIN rail mounting |
| Operating Temperature | 0°C to 50°C |
Describes the SIMATIC IPC227E's high-level industrial functionality.
Describes the physical structure and components of the device.
Provides essential safety guidelines for handling the device.
Steps to take before installing the device.
Details how to identify the device for repairs or theft.
Describes the allowed positions for mounting the device.
Procedures for mounting the device onto different surfaces.
General instructions and notes for mounting the device.
Instructions for mounting the device on a standard rail.
Instructions and diagrams for wall mounting the device.
Instructions for vertical mounting of the device.
Procedures and notes for connecting the device to power and networks.
Important safety notes and precautions before connecting the device.
Steps for connecting the protective conductor.
Procedure for connecting the 24 VDC power supply.
Options for integrating the device into system environments and networks.
General information and requirements for commissioning the device.
Procedure for switching on the device and initial setup.
Details advanced functions like monitoring and filters.
Describes the Enhanced Write Filter for write protection.
Describes the File-Based Write Filter for file-level write protection.
Procedure for opening the device to access internal components.
Instructions for installing a PCIe x1 module.
Procedure for installing and removing CFast memory cards.
Procedures for installing and removing hardware components.
Step-by-step guide for replacing the CMOS backup battery.
Procedures for installing and updating software and drivers.
Describes methods to reinstall the operating system.
Recommends using SIMATIC IPC Image & Partition Creator for data backup.
Detailed technical specifications of the device.
Lists key technical specifications like weight, power supply, and protection class.
Instructions and precautions for updating the device's BIOS.
Lists important device functions available under Windows Embedded Standard 7.
Lists important device functions available under Windows Embedded Standard 7.
Provides links for online information, support requests, and documentation.
Tips on how to locate and troubleshoot common problems.
