Siemens simatic ipc227e - Upright Mounting

Installing and connecting the device
3.2 Mounting the device
SIMATIC IPC227E
Operating Instructions, 11/2016, A5E35782395-AB
37
3.2.4
Upright mounting
Upright mounting is suitable for vertical mounting of the device. The corresponding mounting
bracket allows mounting that requires less space than standard rail mounting and wall
mounting.
Requirement
● Two mounting brackets
The mounting brackets are available in two versions - for the basic device version and for
the PCIe device versions. The mounting bracket and four screws are included in the
order variant "Upright mounting".
● A T20 screwdriver
● Four anchors and four screws
Procedure for mounting
Place the mounting bracket on
the rear of the
device.
Secure the mounting bracket
with 2 screws.
Place the device with the moun
t-
ing brackets onto the mounting
surface.
Mark the fixing holes.
Drill the fixing holes.
Insert the anchors in the drilled
holes.
Screw on the device.