Maintaining and repairing the device
6.4 Installing the software
SIMATIC IPC227E
82 Operating Instructions, 11/2016, A5E35782395-AB
Partitioning data media
6.4.3
Installing drivers and software
Note
In the case of multilingual operating systems (MUI versions), you have to set the regional
settings for menus and dialogs and the default language to English (US) before you install
new drivers or operating system updates.
can install an additional language package for service purposes at a later time with the
supplied USB stick under Windows Embedded Standard 7.
1. Connect the supplied USB stick to the USB port.
2. Start the program "START_DocuAndDrivers".
3. Select "Drivers" in the index.
4. Select the device and operating system.
5. Select the desired driver
6. Open the folder with the driver data by clicking on the link next to "Driver path".
7. Start the setup program in this folder.
Note
For a new installation of Windows
operating systems, the chipset driver must be installed
before all other drivers, if required.
To Next Page
Loading...
Need help?
General
