Siemens simatic ipc227e User Manual

Technical specifications
7.4 Technical data
SIMATIC IPC227E
104 Operating Instructions, 11/2016, A5E35782395-AB
7.4.3
Shipbuilding
Ambient conditions for use of the devices in shipbuilding
The device is suitable for shipping and offshore applications. The installation and attachment
conditions are the same as those for industrial applications.
See the shipbuilding approvals of the individual shipbuilding companies in the section
"Certificates and approvals" to learn about the required ambient conditions.
NOTICE
Ambient conditions and installation guidelines
The permissible ambient conditions and installation guidelines can be found in the
certificates of the individual shipbuilding companies.
7.4.4
Power demand of the components
Maximum power consumption of the auxiliary components
Auxiliary components
Maximum permitted power con-
sumption
Max. total power
+5 V
+3.3 V
+12 V
USB device 3.0
High current
900 mA
--
--
6 W (for all USB devices)
USB Device 2.0
High current
500 mA
--
--
PCIe module
Per slot
--
1.5 A
1
0.3 A
2
5 W in total
1
May amount to maximum 3.0 A for up to 100 ms at start-stop torque of device
2
May amount to maximum 1.2 A for up to 100 ms at start-stop torque of device
Note
Device can overheat!
The power supply cannot make unlimited power available. The auxiliary components
consume energy and produce heat.
The device may overheat. The auxiliary components will be damaged.

Siemens simatic ipc227e Specifications

General

Brand	Siemens
Model	simatic ipc227e
Category	Industrial PC
Language	English