EasyManuals Logo
Home>Siemens>Switch>SIMATIC NET SCALANCE XB-208

Siemens SIMATIC NET SCALANCE XB-208 User Manual

Siemens SIMATIC NET SCALANCE XB-208
78 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #8 background imageLoading...
Page #8 background image
Device defective
If a fault develops, send the device to your SIEMENS representative for repair. Repairs on-site
are not possible.
Decommissioning
Shut down the device properly to prevent unauthorized persons from accessing confidential
data in the device memory.
To do this, restore the factory settings on the device.
Recycling and disposal
The products are low in pollutants, can be recycled and meet the requirements of the WEEE
directive 2012/19/EU for the disposal of electrical and electronic equipment.
Do not dispose of the products at public disposal sites.
For environmentally friendly recycling and the disposal of your old device contact a certified
disposal company for electronic scrap or your Siemens contact (Product return (
https://
support.industry.siemens.com/cs/ww/en/view/109479891)).
Note the different national regulations.
Trademarks
The following and possibly other names not identified by the registered trademark sign
®
are
registered trademarks of Siemens AG:
SIMATIC NET, SCALANCE, C-PLUG, OLM
Introduction
SCALANCE XB-200
8 Operating Instructions, 03/2020, C79000-G8976-C359-09

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Siemens SIMATIC NET SCALANCE XB-208 and is the answer not in the manual?

Siemens SIMATIC NET SCALANCE XB-208 Specifications

General IconGeneral
BrandSiemens
ModelSIMATIC NET SCALANCE XB-208
CategorySwitch
LanguageEnglish

Related product manuals