Siemens SIMATIC OpenPCS 7 User Manual

Additional information
● You can find more information about PCS 7 security concepts in the manual
PCS 7Security
concept .
4.4 Loading the OpenPCS 7 station
Requirements
● The following components are installed on the PC station:
– Operating system
– OpenPCS 7 station software
● The terminal bus is configured on the OpenPCS 7 station.
● The OpenPCS 7 station is connected to the engineering station via the terminal bus.
● The protocol for the communication on the terminal bus is set to TCP/IP.
● The OpenPCS 7 station is configured in the PCS 7project.
● The user logged in on the ES can access the shared Windows folder "\\<OpenPCS 7
Station>\Automation Projects". The folder is located on the OpenPCS 7 station in the path
"C:\Program Files\SIEMENS".
● The PCS 7multiproject is open on the ES.
Procedure
1. Expand the PC station of the OpenPCS 7 station.
2. Expand the SPOSA application.
PCS 7 Engineering
4.4 Loading the OpenPCS 7 station
OpenPCS 7
26 Function Manual, 05/2012, A5E02780178-02

Siemens SIMATIC OpenPCS 7 Specifications

General

Brand	Siemens
Model	SIMATIC OpenPCS 7
Category	Control Systems
Language	English