6.5.9.3 Example 2: Messages are assigned to an area
Introduction
A PCS 7project is generally divided into several system areas and diagnostic areas. This
means that messages are assigned to the areas.
The areas are shown as a hierarchy level in OPC A&E for hierarchical mapping.
Requirement
● The PCS 7project contains areas or diagnostic areas.
Structure for access to messages via the OPC A&E interface
The general mapping to the OPC A&E interface appears as follows:
Example of a hierarchy with an area
The following pictures show the hierarchy of messages in a browser that can be sent to the
client as a "conditional event".
Example with areas:
OpenPCS 7 interface
6.5 OPC Alarms and Events (OPC A&E)
OpenPCS 7
Function Manual, 05/2012, A5E02780178-02 69
To Next Page
Loading...
