2
2-20
Programming Device PG 740
C79000-G7076-C742-01
2.7 Transport
The PG 740 is easy to transport. Before transporting it, however, you should
take the following measures:
1. Switch the PG 740 off.
2. Unplug all connecting cables.
3. Close the covers protecting the ports and connections on the right-hand
and left-hand casing side panels.
4. Bring the unit into an upright position.
5. Swing the keyboard up and press it against the front plate of the unit.
Make sure that the latches on the left and right sides snap in.
6. Use the carrying handle if you only intend transporting the unit over a
short distance.
7. If you are transporting the PG 740 over large distances, pack the unit with
all its accessories in the carrying bag supplied.
Figure 2-17 Prepared for Transport
Despite the fact that the PG 740 is of rugged design, its internal components
are sensitive to severe vibrations or impact. You must therefore protect your
PG 740 against severe mechanical stressing when transporting it.
Use the original packing material if you have to ship the PG 740 from one
location to another.
Preparatory
Measures
Transport
Installing the PG 740
To Next Page
Loading...
