5
5-22
Programming Device PG 740
C79000-G7076-C742-01
5.2 PCI Configuration
The system is configured automatically when you switch it on.
The following table lists the default settings.
Bus No. Device
No.
Function
No.
Description
00h 00h 00h Intel 82437Fx(TSC)
00h 07h 00h Intel 82371FB(PIIX) PCI/ISA jumper
00h 07h 01h Intel 82371FB(PIIX) IDE-PCI interface
00h 0Dh 00h-07h GD7543 Cirrus LCD-SVGA
00h 12h PCI slot 1
5.3 Configuring the PCMCIA Interface
You can obtain the software you require for using PCMCIA cards under
MS-DOS, such as
S Socket Services
S Card Services
S Client Drivers
S Flash File System
from your nearest Siemens sales office or representative.
Windows 95 which is already installed on delivery supports use of the
PCMCIA interface.
Configuring the PG 740
To Next Page
Loading...
