3-1
Programming Device PG 740
C79000-G7076-C742-01
Starting Up the PG 740
This chapter describes what you have to do to set up your PG 740
successfully for operation. This includes
S the basic steps for starting up your PG 740
S working with memory submodules and cards for the programmable
controllers
S connecting your PG 740 to other devices.
In Section You Will Find On Page
3.1 Connecting the PG 740 to the Power Supply 3-2
3.2 Connecting I/O Devices 3-3
3.3 Working with SIMATIC S5 Memory Submodules 3-9
3.4 Working with SIMATIC Memory Cards 3-10
3.5 Working with PCMCIA Cards 3-11
3.6 PG 740 Connections (Point-To-Point Connections) 3-12
3.7 Multipoint Interface (MPI/DP) 3-16
3.8 SINEC L2 3-18
3.9 SINEC H1 3-19
What does this
Chapter Contain?
Summary of
sections
3
To Next Page
Loading...
