3
3-8
Programming Device PG 740
C79000-G7076-C742-01
You can connect another PS/2 keyboard to the PG 740 instead of the one
supplied with it.
1
2
3
1 Extra pull-out support
2 Coverplate
3 Keyboard cable
Figure 3-5 Connecting a PS/2 Keyboard
You connect the keyboard as follows:
1. Switch off your PG 740.
2. Pull out the extra support.
3. Turn the casing through 90°.
4. Open the cover on the underside of the unit, using a screwdriver.
5. Unplug the keyboard connector and cable.
6. Plug in the PS/2 keyboard connector and cable.
7. Close the cover.
Note
It is advisable to use a keyboard cable with angled connector. If the
connector is straight, you will not be able to close the cover and this will
restrict the swivel range of the unit.
Choosing Another
Keyboard
Connecting a
PS/2 Keyboard
Starting Up the PG 740
To Next Page
Loading...
