1
1-2
Programming Device PG 740
C79000-G7076-C742-01
Compared to a PC with standard hardware and software, the PG 740
programming device of the SIMATIC family has numerous advantages:
You can develop, debug and document user programs for SIMATIC S5
and SIMATIC S7 programmable logic controllers with the PG 740
without the need for additional hardware or software.
The rugged design and functionality of the PG 740 make it particularly
suitable for use on site under hostile industrial conditions. The PG 740
meets the specific requirements of industrial environments, such as
noise immunity, compliance with the relevant standards, ruggedness,
simple transportation and startup.
The PG 740 can be set up and operated in a large number of different
ways and positions, and can therefore be used practically everywhere it
is needed.
The PG 740 has all the integral ports necessary for connecting it to
SIMATIC automation devices:
– Programming interface for SIMATIC S5 EPROMs and EEPROMs
– Programming interface for SIMATIC S5 and SIMATIC S7 memory
cards in credit-card format
– Interfaces for connection to S5 and S7 programmable controllers.
The PG 740 is supplied with all the necessary system and automation
software already installed on the hard disk.
Since MS-DOS and Windows are also already installed, you can, of
course, also use the PG 740 as a stand-alone workstation, and run all
the standard software available on the market that requires MS-DOS or
Windows.
The PG 740 has the power and expansion capability of normal PCs,
and can therefore also be used as a fully-fledged personal computer.
Advantages of
the PG 740
Product Overview
To Next Page
Loading...
