Siemens SIMATIC PM-E - Error Types

Diagnostics
3.2 Error types
Power module PM-E DC24V (6ES7138-4CA01-0AA0)
14 Manual, 04/2007, A5E01119952-02
3.2
Error types
Power module error types
The diagnostic message is reported on channel 0 and applies to the entire module.
The table below shows the types of errors affecting power modules
Table 3- 1 Power module error types
Error type
Meaning
Remedy
17
D
10001: Encoder or load
voltage missing
Supply voltage not present
or too low.
Correct the process wiring. Check
the supply voltage.