Need help?Do you have a question about the Siemens simatic et200sp and is the answer not in the manual?
General| Category | I/O Systems |
|---|---|
| Power Supply | 24 V DC |
| Protection Rating | IP20 |
| Number of Modules | Up to 64 modules |
| Mounting | DIN Rail |
| Communication Protocols | PROFINET, PROFIBUS |
| Storage Temperature | -40 °C to +70 °C |
| Digital Inputs | Yes (depending on module) |
| Digital Outputs | Yes (depending on module) |
| Analog Inputs | Yes (depending on module) |
| Analog Outputs | Yes (depending on module) |
| Modularity | Modular |
| Relative Humidity | 5 to 95% (non-condensing) |
| Weight | Varies by configuration |
| System Type | Distributed I/O |
Notices to observe for personal safety and to prevent property damage.
Explains the use of the AI Energy Meter 480VAC ST in industrial energy management.
Details the technical properties and components of the AI Energy Meter module.
Shows the terminal layout and block diagram of the AI Energy Meter.
Provides critical safety warnings for electrical installations.
Provides guidelines for selecting appropriate current transformers.
Explains the process of configuring the AI Energy Meter using STEP 7.
Guides on choosing module versions based on address space and data requirements.
Explains methods for accessing measured values (User data, Data records).
Describes how to read measured values from user data cyclically.
Explains reading measured values using the RDREC instruction.
Explains the functionality and types of energy counters.
Details how to configure energy counters, including gate control.
Describes the structure and use of data record DS 143 for energy counters.
Details methods for resetting operating hours counters.
Summarizes all configurable parameters for the AI Energy Meter.
Provides detailed explanations of each configurable parameter.
Lists detailed technical data for the AI Energy Meter 480VAC ST module.
Overview of all measured variables used in data records and user data.
To Next Page
