Siemens SIMATIC RTU3041C - Page 39

2 Engineering
Securely Connecting RTU3041C to TeleControl Server Basic
Entry ID: 109739240, V3.0, 07/2021
39
© Siemens AG
2021 All rights reserved
8. Click on input 1.
9. Enable the "Active" checkbox.
10. Assign the name "enableReadFillLevel".
11. Select that an additional update cycle is also performed in sleep mode when
the value changes.
12. Then click "Apply".
10
11
12
13. Open the "Digital memory bits" tab.
14. Click on the 0 memory bit.
15. Enable the "Active" checkbox.
16. Assign the name "fillLevel90".
17. Then click "Apply".
13
14
15
17
16