Need help?Do you have a question about the Siemens SIMATIC S5-95U and is the answer not in the manual?
Defines terms like 'Warning' and 'Danger' for safety information.
Guidelines for correct and safe operation of the equipment.
Overview of devices and communication mechanisms for the S5-95U.
Lists functions possible at SI1 and SI2 interfaces for programmer/operator panel.
Explains how to set up a link using direct cable or transceivers.
Describes linking S5-95U with partners using direct cable and pin assignments.
Details linking S5-95U with partners via direct cable and pin assignments.
Defines terms like 'Warning' and 'Danger' for safety information.
Guidelines for correct and safe operation of the equipment.
Overview of devices and communication mechanisms for the S5-95U.
Lists functions possible at SI1 and SI2 interfaces for programmer/operator panel.
Explains how to set up a link using direct cable or transceivers.
Describes linking S5-95U with partners using direct cable and pin assignments.
Details linking S5-95U with partners via direct cable and pin assignments.
General| Series | SIMATIC S5 |
|---|---|
| CPU Type | S5-95U |
| Analog Inputs | 8 |
| Analog Outputs | 4 |
| Input Voltage | 24 V DC |
| Power Supply | 24 V DC |
| Type | PLC |
| Operating Temperature | 0 to 60 °C |
To Next Page