Siemens SIMATIC S7-1200 Operating Instructions

CP 1243-1 PCC
Operating Instructions, 02/2015, C79000-G8976-C384-01
69
Documentation references
C
Where to find Siemens documentation
● You will find the article numbers for the Siemens products of relevance here in the
following catalogs:
– SIMATIC NET Industrial Communication / Industrial Identification, catalog IK PI
– SIMATIC Products for Totally Integrated Automation and Micro Automation, catalog
ST 70
You can request the catalogs and additional information from your Siemens
representative.
● You will find SIMATIC NET manuals on the Internet pages of Siemens Automation
Customer Support:
Link to Customer Support (http://support.automation.siemens.com/WW/view/en)
Enter the entry ID of the relevant manual as the search item. The ID is listed below some
of the reference entries in brackets.
As an alternative, you will find the SIMATIC NET documentation on the pages of Product
Support:
10805878 (http://support.automation.siemens.com/WW/view/en/10805878)
Go to the required product group and make the following settings:
"Entry list" tab, Entry type "Manuals / Operating Instructions"
● You will find the documentation for the SIMATIC NET products relevant here on the data
medium that ships with some products:
– Product CD / product DVD or
– SIMATIC NET Manual Collection
/1/
SIMATIC
S7-1200 Programmable Controller
System Manual
Siemens AG
Current issue under the following entry ID:
34612486 (http://support.automation.siemens.com/WW/view/en/34612486)
Siemens Automation

Siemens SIMATIC S7-1200 Specifications

General

CPU Type	CPU 1211C, CPU 1212C, CPU 1214C, CPU 1215C, CPU 1217C
Communication	PROFINET
Analog Inputs	2
Analog Outputs	2
Power Supply	24V DC
Expansion Modules	Signal Modules (SM), Communication Modules (CM)
Programming Languages	LAD, FBD, SCL
Dimensions	90 mm x 100 mm x 75 mm
Program Memory	50 KB to 150 KB (depending on model)