83
2.20 Maintenance, Repair and Cleaning
The SIMEAS P does not require special maintenance. If
necessary, it can be checked in a laboratory and readjusted.
Repair of defective modules is never recommended be-
cause specially selected electronic components are used
which must be handled in accordance with the procedures
required by Electrostatically Endangered Components
(EEC).
Therefore, if a device defect is suspected, it is recom-
mended that the complete device be returned to the manu-
facturer. Use the original transport packaging or an appro-
priate packaging for return.
If it is unavoidable to replace individual modules, it is im-
perative that the standards related to the handling of Elec-
trostatically Endangered Components are observed.
WARNING!
When carrying out changes on site, the instructions for handling
electrostatically endangered components must be observed (EEC).
To Next Page
Loading...
