Siemens SIMOTION D410 DP Commissioning Manual

Commissioning (software)
4.2 Configuring the system in offline mode
SIMOTION D410
78 Commissioning Manual, 02/2012
6. Select a motor holding brake (if installed).
Figure 4-6 Selecting a motor holding brake
7. If you are using a motor that is not equipped with a DRIVE-CLiQ interface, select the
encoder order number in the "Encoder Selection via Motor Order Number" dialog box.
Figure 4-7 Selecting a motor encoder (1)

Siemens SIMOTION D410 DP Specifications

General

Brand	Siemens
Model	SIMOTION D410 DP
Category	Control Unit
Language	English