Siemens SIMOTION D410 DP

SIMOTION D410
Commissioning Manual, 02/2012
45
Parameter assignment / addressing
3
3.1 Software requirements
SIMOTION SCOUT Engineering System
The SIMOTION SCOUT Engineering System must be installed on your programming device
/ PC in order to commission the SIMOTION D410. Please note the information on the latest
"SIMOTION SCOUT" DVD.
For information on how to install SIMOTION SCOUT on your programming device / PC, refer
to the
SIMOTION SCOUT Configuration Manual.
3.2 Creating a project and configuring the communication
3.2.1 Creating a SIMOTION project and inserting a SIMOTION D410
Procedure
Proceed as follows in order to create a project in SIMOTION SCOUT and to insert a
SIMOTION D410:
1. Select the Project > New... menu command.
2. Enter a name for your project in the "New Project" dialog box and confirm your entry with
"OK".
A new folder with the name of the project will be created in the project navigator.